Re: Jumper Settings for Sony SDT-5200

Need a DRIVER? Click Here!

---

[ Follow Ups ] [ Post Followups ] [ FAQ ]

[ Back to Messages ]

---

Posted by Norbert Kerker on August 02, 2002 at 03:19:38:

In Reply to: Jumper Settings for Sony SDT-5200 posted by Torsten on April 26, 2002 at 15:17:28:

Hi Torsten,
make sure using dds1 media
take your drive and look at rear connector
pin 1 is located at upper rihgt (red stripe)
jumper block is now located at lower part of drive next to power connector
jumper 1,2,3 scsi id number (do not use 0,1,or 7)
jumper 4 data compression disable
jumper 5 parity disable
jumper 6 reserved
jumper 7 termination enable
jumper 8 term pwr

Regards
Norbert

---

---

Looking for a device driver? Try DriverGuide.com

---

Follow Ups:

---

Post a Followup

Please note:

• Messages must be on the topic of this forum!
• No posting of requests for cracks, codes, serials, or warez!
• No posting of illegal software or links to such sites!
• No use of profanity or inappropriate or offensive language!
• Spamming is not allowed!
• We track the IP addresses of forum abusers!
• Abuse of this forum will be reported to your ISP!

Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:
: Hi Torsten, : make sure using dds1 media : take your drive and look at rear connector : pin 1 is located at upper rihgt (red stripe) : jumper block is now located at lower part of drive next to power connector : jumper 1,2,3 scsi id number (do not use 0,1,or 7) : jumper 4 data compression disable : jumper 5 parity disable : jumper 6 reserved : jumper 7 termination enable : jumper 8 term pwr : Regards : Norbert

Optional Link URL:
Link Title:
Optional Image URL:

---

Need a DRIVER? Click Here!