Re: installation Visioneer 7600 w/ Microsoft XP

Re: installation Visioneer 7600 w/ Microsoft XP

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Bill on April 08, 2002 at 18:04:07:

In Reply to: Re: installation Visioneer 7600 w/ Microsoft XP posted by Emmanuel Potron on January 27, 2002 at 11:55:30:

: : : I need drivers to install Visioneer 7600 into Microsoft XP home.

: : Trying to find them myself.

: Hello guys,

: I have updated my PC from Windows ME to XP (Home Version) some weeks ago and got the same trouble with my Scanner, a Visioneer OneTouch 7600 USB.
: I was not happy because I bought the scanner end of 2000, and was expecting to use it for a long time.
: My configuration was a HP Pavilion, using Windows ME, and having Visioneer OneTouch 7600 USB installed and running properly, with PaperPort6.1.

: I started looking at Visioneer site, but the workaround they describe did not solve apparently the problem. Here is the link anyway:

: Later on, I found the solution on another forum. Here is the methodology (may be not optimized, but it worked for me):
: Go in Control Panel, Performances and Maintenance, System. In the Panel, select Hardware tab, then Device Manager.
: In Imaging Devices, right click on Visioneer, then Update Driver. In the wizard, select the Install from a specific location, and select your CD reader, where you put the CD from Visioneer. Windows XP wizard seems to find what it is looking for, and now my scanner is working properly.

: I don't know if only the methodology above solve the problem, or if what I have done previously with Visioneer recommendations plus the above steps solve it.

: Anyway, good luck!
: Emmanuel.

I have a 7600usb Visioneer. On the disk,it has PaperPort Deluxe 6.5. It worked great on my old Windows 98 But will not "Connect" on my Windows Xp. I downloaded your driver "7600u2k" but am unable to make it work. I printed your directions that came with the download, but i am not computerwise enough to understand them. The " 7600u2k" icon is on my desktop. When I double click it, the wizard starts ,when I click "next" it says, Plug in scanner and click finish. All done in one step in less than a second? Anyway, nothing changes. It still will not connect. Connections to PC and AC are correct, in case you are wondering. Bill

Follow Ups:

Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
E-Mail (optional):
please note: your e-mail address will be visible in your message.



Optional Link URL:
Link Title:
Optional Image URL: