Re: Something to try

Re: Something to try


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by saravia on June 06, 2000 at 22:32:02:

In Reply to: Something to try posted by Tony Waldron on March 22, 2000 at 12:33:13:

: If you have the right drivers loaded you might have problems with the port settings in the print manager or the LPT port on the computer might be set wrong. 1st check your spool setting and set it to RAW (note current settings and write them down), if that doesn't work try the CMOS setting and change them to EPP or SPP, there should be a couple of diffrent setting that you can choose from.Note the current setting in the CMOS as well.

: Those are my ideas.
: Best of luck
: Tony

: The link below goes to my Web site




Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: