Re: Printing in MS-DOS with EPSON STYLUS COLOR 760

Re: Printing in MS-DOS with EPSON STYLUS COLOR 760

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Tony Waldron on April 08, 2000 at 11:19:18:

In Reply to: Printing in MS-DOS with EPSON STYLUS COLOR 760 posted by Isildo Mendes on April 06, 2000 at 04:54:51:

This info was on the Epson support site

Q: How can I print using Windows 3.x, DOS applications or from the
DOS prompt with this printer?

A: D4 Mode of the parallel interface must be disabled (OFF) in order
to print from Windows 3.x or DOS. Take the following steps to set
the D4 Mode.

1. Turn on the printer while holding down the Cleaning button.
2. The paper out light will start blinking.
3. Release the Cleaning button and immediately press the Load/Eject
button and hold it for about 20 seconds.
4. The Paper Out, Color Ink Out and Black Ink Out LED's will light.
5. Release the Load/Eject Button.
6. Press the Cleaning Button and observe the LED conditions as
follows to select the desired D4 Mode:

Paper Out LED - ON = D4 Mode ON
Black Ink Out LED - ON = D4 Mode OFF
Color Ink Out LED - ON = D4 Mode AUTO

NOTE: Be sure to set the D4 Mode to AUTO for normal operation.

I hope this is of some help to you

The link below goes to my web site

Follow Ups:

Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
E-Mail (optional):
please note: your e-mail address will be visible in your message.



Optional Link URL:
Link Title:
Optional Image URL: