Re: drives kodak diconix 180 si

Re: drives kodak diconix 180 si
Re: drives kodak diconix 180 si

Need a DRIVER? Click Here!

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]
Posted by Mario DiStasio on February 01, 2002 at 23:16:31:
In Reply to: drives kodak diconix 180 si posted by enrico on January 04, 2002 at 14:01:41:
:
: drives kodak diconix 180 si for win 98 / 95
I figured it out. The drivers on the Kodak site do not work. They are for Windows 16 bit from 1992/1993. The solution is to use the start-up sequence listed on the bottom of the printer to use either the Epson FX85 or IBM Proprinter emulation. Power up holding the online button to go into setup and the printer tells you the rest. Once the emulation is set use the corresponding native Windows driver. Both the Epson FX-85 and IBM proprinter settings seem to work just fine. Only problem is that the text is a bit small. According to the comments that I read on the web, this is because the 180 printer has a lower resolution that the other two printers. I can live with this, however, since I otherwise have full functionality and can always play with the fonts if I have to.

Looking for a device driver? Try DriverGuide.com

Follow Ups:

Post a Followup

Please note:

Messages must be on the topic of this forum!
No posting of requests for cracks, codes, serials, or warez!
No posting of illegal software or links to such sites!
No use of profanity or inappropriate or offensive language!
Spamming is not allowed!
We track the IP addresses of forum abusers!
Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.
Subject:
Comments:
: : : : drives kodak diconix 180 si for win 98 / 95 : I figured it out. The drivers on the Kodak site do not work. They are for Windows 16 bit from 1992/1993. The solution is to use the start-up sequence listed on the bottom of the printer to use either the Epson FX85 or IBM Proprinter emulation. Power up holding the online button to go into setup and the printer tells you the rest. Once the emulation is set use the corresponding native Windows driver. Both the Epson FX-85 and IBM proprinter settings seem to work just fine. Only problem is that the text is a bit small. According to the comments that I read on the web, this is because the 180 printer has a lower resolution that the other two printers. I can live with this, however, since I otherwise have full functionality and can always play with the fonts if I have to.
Optional Link URL:
Link Title:
Optional Image URL:

Need a DRIVER? Click Here!