Re: Win 2000 Driver for XEROX DocuPrint C6

Re: Win 2000 Driver for XEROX DocuPrint C6


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by johnny on September 21, 2001 at 10:36:26:

In Reply to: Re: Win 2000 Driver for XEROX DocuPrint C6 posted by Ágnes Kolber on April 12, 2001 at 15:01:57:

: : Driver for XEROX DocuPrint C6
C6 Installation for Windows 2000

Step 1 - Firmware Upgrade
To perform the firmware upgrade, the printer must be installed on a PC running Windows 95 or Windows 98. It must be connected with an IEEE 1284 compliant parallel cable. The firmware upgrade can not be run on a PC running Windows NT 4.0 or 2000.

1. Download the firmware upgrade from the Drivers page on www.xerox.com.
To download the firmware, select the DocuPrint C8, Windows 98 and English in the Drivers & Utilities area.
2. Be sure to select the file named fwupgss.exe.
3. Select to save the file to disk.
4. Save the file to the desktop.
5. The file will begin downloading. Once the download is completed you will receive a confirmation. Click OK to continue.
6. After the confirmation the fwupgss.exe icon should appear on the desktop. Double click the icon to begin running the firmware upgrade.
7. At the first window click OK.
8. Select the DocuPrint C6 from the list.
9. Click OK at the next window once you have checked to verify there is printer in the paper, it is connected correctly and the red light is off.
10. Once the test page has completed, the firmware should be fully upgraded. You can verify this by checking the ROM version shown on the test page. If the test page did not print correctly, click the retry button.


Step 2 - Driver Installation
The printer can now be connected to a PC running Windows 2000 with an IEEE 1284 compliant printer cable.

1. Go to www.xerox.com and click Drivers.
2. Select the C8, English and Windows 2000 and click Go.
3. Select the file named XDC8US.exe
4. When you click the file name XDC8US.exe, select to save the program to disk and click OK.
5. Select to save the file to the Desktop and click Save.
6. When the download is complete, the icon will appear on the desktop. Double click the xdc8us.exe icon to begin the install process.
7. The license agreement will appear, click "Yes" to continue.
8. The file will unpack.
9. At the welcome screen, click Next to continue.
10. The license agreement will appear again, click "I Agree".
11. Select Yes to set the C8 as the default printer and click Next.
12. After the files are copied, click Finish to complete the setup.



Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: