Re: Looking for driver for UM9008 ISA NIC

Re: Looking for driver for UM9008 ISA NIC
Re: Looking for driver for UM9008 ISA NIC

Need a DRIVER? Click Here!

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]
Posted by juan motorola on March 28, 2002 at 05:41:28:
In Reply to: Re: Looking for driver for UM9008 ISA NIC posted by W_Yuan on January 05, 2002 at 19:09:23:
: : Thank you in advance!
: : I have a LAN build-in computer which has a UM9008 Chip in it. The manual said the hardware is 100% compatible with Novell NE2000. It does run under Windows98 with IRQ=4, I/O=320. Now, it doesn't work under RedHat 7.0(build 2.2.16-22). I ran linuxconf-auth to change device module=ne.o , IRQ=4, I/O=0x320 but RedHat still doesn't recognize it. After I halted my computer, I got...
: : ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nada.gov)
: : NE*000 ethernet probe at 0x320:not found (invalid signature fefe).
: : ne.c: No NE*000 card found at i/o=0x320
: : insmod:/lib/modules/2.2.16-22/net/ne.o init_module:Device or resource busy
: : insmod:/lib/modules/2.2.16-22/net/ne.o: insmod eth0 failed.
: : While the computer ran under Windows 98, I got information as follows,
: : 16 bit slot
: : Node Address[00 60 ef 00 64 f5]
: : IRQ-4
: : I/O-320H
: : Media Type-UTP
: : Boot Rom-Disable
: : Please let me know which driver(device module) that I can use under RedHat7.0 or where I can download one for UM9008 (I think it came from UMC). Thanks a lot!

i am on 7.1 seawolf RedHat with the same
ethernet card. Try these modules
#insmod 8390
#insmod ne
should work fine with your 7.0 release (i hope).
send me money or hemp if u find useful this info.

Looking for a device driver? Try DriverGuide.com

Follow Ups:

Post a Followup

Please note:

Messages must be on the topic of this forum!
No posting of requests for cracks, codes, serials, or warez!
No posting of illegal software or links to such sites!
No use of profanity or inappropriate or offensive language!
Spamming is not allowed!
We track the IP addresses of forum abusers!
Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.
Subject:
Comments:
: : : Thank you in advance! : : : I have a LAN build-in computer which has a UM9008 Chip in it. The manual said the hardware is 100% compatible with Novell NE2000. It does run under Windows98 with IRQ=4, I/O=320. Now, it doesn't work under RedHat 7.0(build 2.2.16-22). I ran linuxconf-auth to change device module=ne.o , IRQ=4, I/O=0x320 but RedHat still doesn't recognize it. After I halted my computer, I got... : : : ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nada.gov) : : : NE*000 ethernet probe at 0x320:not found (invalid signature fefe). : : : ne.c: No NE*000 card found at i/o=0x320 : : : insmod:/lib/modules/2.2.16-22/net/ne.o init_module:Device or resource busy : : : insmod:/lib/modules/2.2.16-22/net/ne.o: insmod eth0 failed. : : : While the computer ran under Windows 98, I got information as follows, : : : 16 bit slot : : : Node Address[00 60 ef 00 64 f5] : : : IRQ-4 : : : I/O-320H : : : Media Type-UTP : : : Boot Rom-Disable : : : Please let me know which driver(device module) that I can use under RedHat7.0 or where I can download one for UM9008 (I think it came from UMC). Thanks a lot! : : i am on 7.1 seawolf RedHat with the same : ethernet card. Try these modules : #insmod 8390 : #insmod ne : should work fine with your 7.0 release (i hope). : send me money or hemp if u find useful this info. :
Optional Link URL:
Link Title:
Optional Image URL:

Need a DRIVER? Click Here!