Re: SiS 7001 PCI to USB Open Host Controller

Re: SiS 7001 PCI to USB Open Host Controller


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Ricardo Iramar dos Santos on April 04, 2002 at 11:39:54:

In Reply to: SiS 7001 PCI to USB Open Host Controller posted by Silicon Chip on November 14, 2001 at 18:16:27:

The USB Controller Is Not Recognized and a Code 10 Error Message Appears in Device Manager (Q297511)

--------------------------------------------------------------------------------
The information in this article applies to:


Microsoft Windows 2000 , Professional
Microsoft Windows 2000 , Server
Microsoft Windows 2000 , Advanced Server


--------------------------------------------------------------------------------


SYMPTOMS
On a computer whose motherboard has a Silicon Integrated Systems (SIS) chipset, Device Manager may display the following error message for the USB controller:

Code 10 - the device cannot start.
If you manually update the USB controller driver in Device Manager, the controller may seem to be installed correctly. However, the controller reverts to the "code 10" status when you restart the computer.

This behavior is known to occur on the PCCHIPS M741LMRT motherboard and on the SIS 530 motherboard. The USB controller is listed in the Device Manager as SIS 7001 PCI to USB Open Host Controller.

CAUSE
This behavior can be caused by an incorrect basic input/output system (BIOS) setting. The system BIOS has a setting for DOS USB function.

RESOLUTION
To resolve this behavior, disable the DOS USB function in the system BIOS. For information about how to do this, refer to the documentation for your computer.


--------------------------------------------------------------------------------
Published Feb 21 2002 8:51AM Issue Type kbprb
Last Modifed Feb 21 2002 8:51AM Additional Query Words
Keywords kb3rdparty kbenv kbhw

--------------------------------------------------------------------------------

COMMENTS?

If you would like to briefly comment on this article, you can enter your remarks in the space below (up to 255 characters).




Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: