Re: ide controllers not working please help

Re: ide controllers not working please help

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by colin on August 01, 2001 at 13:26:29:

In Reply to: ide controllers not working please help posted by dale on August 01, 2001 at 04:05:43:

If you use Win 98SE or later most enumeration problems are sorted out so it looks like a straight forward IRQ conflict. Look in device manager for the reason behind the yellow mark, your IDE's should be using IRQ 14 and IRQ 15 for IDE1 and IDE2 respectively. If not change them, if Windows wont let you check which devices they conflict with and remove them, physically that is as well as in device manager. remove your IDE controller and reboot, they should get reloaded without the problem. Now put each other device back on its own and reboot, if you get the conflict change it to a different slot and try again.
If you have an Intel chipset there is a device enumerator you can download from that may help.

Follow Ups:

Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
E-Mail (optional):
please note: your e-mail address will be visible in your message.



Optional Link URL:
Link Title:
Optional Image URL: