![]() |
Seagate 13.0 GB problem Seagate 13.0 GB problem
Need a DRIVER? Click Here!
[ Follow Ups ] [ Post Followups ] [ FAQ ] [ Back to Messages ] Posted by Erwin on April 25, 2002 at 04:11:46:
I'm using pentium III 551MHz,128 MB RAM,13GB Seagate hard drive, with windows XP.
Each time I turn my computer,it is running well until 10 minutes later it's always slowing down.or occasionally stop.and when it stop i push the restart button but it even worst because the hardrive is not recognised. disk error!and sometimes when it stop there is a blue screen appearing with these words :A problem has been detected and windows has been shutdown to prevent damage on your computer.
KERNEL_STACK_INPAGE_ERROR
If this the first time you’ve seen this stop error screen, restart your computer. If this screen appears again, follow these steps :
- Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer or any windows updates you might need.If problem continue, disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.
Technical information :
*** Stop: 0x000000077 (0xC000000E,oxc000000E,0x0000000000, 0x00478000)*** mrxsmb.sys – address F57CD131 based at F5798000, datestamp 3B7DE1A1
Beginning dump physical memory.
please help me,it's really2 frustating.
Looking for a device driver? Try DriverGuide.com
- Re: Seagate 13.0 GB problem Dmitry 08:09:11 7/17/02 (1)
- Re: Seagate 13.0 GB problem Dmitry 08:30:16 7/17/02 (0)