Re: HD UDMA problem!!!!!!

Re: HD UDMA problem!!!!!!


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Mel on April 21, 2002 at 22:28:37:

In Reply to: Re: HD UDMA problem!!!!!! posted by Henry on March 25, 2002 at 22:53:42:

Go to setup and make sure that power management is set to ACPI only and HD needs to be set at UDMA MODE 5 instead of PIO 4. In device manager check DMA box for disk drive GERERIC IDE DISK TYPE 47 If you have PNP BIOS it needs to be removed and make sure ACPI BIOS is used. You may need to get a toggle utility from the HD manufacturer, it will be a self extracting file that will need to be put on a floppy so you can boot from it, also make sure that the 40 pin 80 conductor cable has the blue end plugged into the motherboard and the black end is plugged into the HD. Good luck




Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: