Re: Drive defaulting to PIO not UDMA100

Re: Drive defaulting to PIO not UDMA100


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by edwin on March 29, 2002 at 03:38:30:

In Reply to: Drive defaulting to PIO not UDMA100 posted by Steven Roussey on March 29, 2002 at 00:08:43:

hi have you got the 80 pin cables plugged in to the raid connectors....i think this may be your problem! let me now if it is or not!

: I have a new mainboard (BIOS set to use UDMA100), a 80pin cable correctly connected, WinXP (the Device Manager Primary Channel set to use DMA if available, but says using PIO mode), and a Quantum Fireball AS 40 drive (only jumper is set to use CS -- cable select -- which is Master).

: While it is a newer drive, it used to be used in an old system. Is it using PIO still because it was formatted in such a manner on that older system?




Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: