Re: J530BF Motherboard and a K6-2 500MHz processor

Re: J530BF Motherboard and a K6-2 500MHz processor


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by John on November 19, 2001 at 21:58:05:

In Reply to: Re: J530BF Motherboard and a K6-2 500MHz processor posted by John on November 19, 2001 at 21:17:01:

: : What are the jumper settings? jp8 >pins 1-2 open_pins 3-4 short_pins 5-6,7-8,9-10 are open this will be 2.2 volts > pins SD open_pins FS2 open_pins FS1 short_pins FS0 short this will set CPU bus at 100 Mhz > CPU raito is 5.0x_pins BF0 is off_pins BF1 on_pins BF2 is on

: this is how my J 530 BF board is set up for a K6-2 500 Mhz chip

per jetway site WWW.jetway.com.tw

Answer: J-542B(only Rev 3.0)/J-542C/J-530BF/J-530CF/J-531CF always support AMD K6-2 and AMD K6-3 CPU highest to 550MHz. please make sure your CPU's voltage before you install. If your J-542B board is not Rev 3.0,then can't support 2.3V and 2.4V CPU. AMD K6-2 and K6-3 500MHz CPU (100MHz FSB * 5.0 Ratio)
J-542B (SW1) OFF OFF OFF OFF ON ON
J-542C (SW1) OFF OFF OFF OFF ON ON
AMD K6-2 and K6-3 550MHz CPU (100MHz FSB * 5.5 Ratio)
J-542B (SW1) OFF OFF OFF OFF OFF ON
J-542B (SW1) OFF OFF OFF OFF OFF ON

AMD K6-2 and K6-3 500MHz CPU (100MHz FSB * 5.0 Ratio)
Model/Jumper SD FS2 FS1 FS0 BF0 BF1 BF2
J-530BF Open Open Short Short Open Short Short
J-530CF Open Open Short Short Open Short Short
J-531CF Open Open Short Short Open Short Short
AMD K6-2 and K6-3 550MHz CPU (100MHz FSB * 5.5 Ratio)
Model/Jumper SD FS2 FS1 FS0 BF0 BF1 BF2
J-530BF Open Open Short Short Open Open Short
J-530CF Open Open Short Short Open Open Short
J-531CF Open Open Short Short Open Open Short


Question: How can i set AMD K6-2 550 CPU 2.3V on J-542B/J-530BF/J-530CF/J-531CF?
Answer: Firstly,please check your CPU voltage 2.3V and tehn set the jumper setting as below: Model\Jumper 1-2 3-4 5-6 7-8 9-10
J-542B Rev3.0 (JP3) Short Short Open Open None
J-530BF/J-530BFR2 (JP8) Short Short Open Open Open
J-530CF (JP9) Short Short Open Open Open
J-531CF (JP9) Short Short Open Open Open


Question: How to solve JETWAY J-620BF Mother Board (SIS620 M/B) PC HEALTH MONITOR CPU Temperature Over heating?
Answer: Please Update J-620BF (SIS620 M/B) PC HEALTH MONITOR Driver 620Hm.ZIP AND 620BFA03.BIN BIOS Together , To Fix Temperaure Value Problem





Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: