Re: hard drive controller in win 95 is screwed up HELP!

Re: hard drive controller in win 95 is screwed up HELP!

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Jamie R. on July 06, 2000 at 17:25:17:

In Reply to: hard drive controller in win 95 is screwed up HELP! posted by Vic Villena on May 01, 2000 at 01:02:52:

: ok heres the deal, in the system settings in win 95 under hard disc controllers, my IDE ports 1 and 2 have the yellow circle with the exclamation point in them this is causing drives c: (hard disc) and D: (cd-rom)to gointo compatibility mode. I went through my config.sys and autoecec.bat files and found no conflicts or problems. when i click on the proporties for the effected IDE ports it says it is not working correctly,doesnt have the right drivers, and so on . this problem came suddenly, I have a feeling it cd-rom drive caused the problem but im not sure. HELP PLEASE! thank you
Here is the good old Microsaft trouble shooting file for ms-dos comp mode goto type in the seach box Q130179 and will give you the walkthrough for trouble shooting now what devices are connected to the IDE ports and what does it give for the port names under device mngr?

Follow Ups:

Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
E-Mail (optional):
please note: your e-mail address will be visible in your message.



Optional Link URL:
Link Title:
Optional Image URL: