Re: SiS IDE driver & IBM D60gxp HDD in W2000 (ATA100 problem)

Re: SiS IDE driver & IBM D60gxp HDD in W2000 (ATA100 problem)


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by colin on November 27, 2001 at 16:37:40:

In Reply to: SiS IDE driver & IBM D60gxp HDD in W2000 (ATA100 problem) posted by Mino on November 27, 2001 at 02:34:14:

Try benchmarking it to see which is accurate it should return an average seek of about 8.5 ms.
Also you could try the drive test download from ibm.com there are several options to test the drives actual ATA rate and change it if needed, once set it cant operate at any other, other than for compatibility reasons. You dont have your CD, or any other drive on the same controller and presumably you are using 80 strand data ribbon, if either of these is the case then the drive will default to Udma 33 and would correctly register with any OS as PIO mode 4.



Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: