Re: ide hd stops winme loading - conflict with scsi?

Re: ide hd stops winme loading - conflict with scsi?


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Matte on February 09, 2002 at 08:18:57:

In Reply to: ide hd stops winme loading - conflict with scsi? posted by andy on December 26, 2001 at 05:08:26:

: Hi

: I have an AMD K6-2-450 running off an A-trend 5220 MB - have been using a 9gb scsi hd on an adaptec 2930u2 card. Added a sony CDRW (as primary master) no probs. Recently added western digital 40gb drive as secondary master and hit some probs...

: firstly, jumper settings - had to use the alternate settings (two jumpers on 10 pin) to get bios to recognise - also only getting format at 32gb...

: however, biggest nag is that winme (booted off scsi drive) hangs while mouse.vxd loads - try rebooting 4-8 times before successfully booting machine - works fine after this.

: have latest bios (v.1.0.0.8gs) - also latest ide (VIA) drivers too.

: has anyone experienced similar problem? have tried new ide cables too -

: any advice would be appreciated

: regards

: andy

Update your promise ultra ata drivers :)


Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: