![]() |
DTC-3181x working on WindowsME DTC-3181x working on WindowsME
Need a DRIVER? Click Here!
[ Follow Ups ] [ Post Followups ] [ FAQ ] [ Back to Messages ] Posted by Daniel Llacer on November 28, 2001 at 13:11:57:
In Reply to: Re: I need a driver for DTC436E posted by Eduardo on September 23, 2000 at 08:01:45:
I have a Mustek MFS-12000 scanner with a DTC-3181x card
It works with those drivers. Your problem may be with
the cards jumpers. I think jumper1 must be set to OFF and j2 to ON
There is explanation at http://www.mustek.com in their
FAQs page -look for scanners--->single pass
BTW, If anyone gets to make this card work on Windows2000 or
WindowsXp let me know.: : I need driver for DTC-436E as quick as it's possible
: : : thanks for help: That is a scsi card. Looking around I found out that this card is also the DTC-3181 and made by Domex Technologies. They have the drivers here:
: http://www.domexusa.com/driver.htm
: But if you are trying to make it work in a Windows ME I tell you they don't work, I have the same probl
Looking for a device driver? Try DriverGuide.com