Re: I got a different problem

Re: I got a different problem

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by on October 26, 2001 at 21:59:57:

In Reply to: I got a different problem posted by Jose Pinzon Douma on October 25, 2001 at 08:59:00:

How many pins does your scanner cable have?

You simply need a card with an external connecter that matches your cable (unless you want to buy another cable). Cables can be half the cost of a cheap card.

Adaptec 2906 is a PCI card with an internal 50 pin connector and has a 25 pin external connector (same configuration as a printer port) that works with my Microtec E6 scanner. Card has no bios (so I can't boot from attached drives) and costs about $45-$60. You can buy a cheaper card from DTC, Advansys, others, etc. but may not find one with the appropriate external connector (which means you have to buy a cable).

Hope this helps, e-mail if you have questions.

: I upgrated my old pc but I bought a Motherboard without any ISA, and I don't have an Adapter like SYM20402 to plug my hp scanner to this, where can I buy an functionally adapter.

: Regards,

: Jose

Follow Ups:

Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
E-Mail (optional):
please note: your e-mail address will be visible in your message.



Optional Link URL:
Link Title:
Optional Image URL: