Re: Your help is needed!

Re: Your help is needed!


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Kolobos on January 02, 2005 at 08:38:19:

In Reply to: Re: Your help is needed! posted by NZ on January 02, 2005 at 05:48:03:

If bootblock is ok then you can reflash your bios with boot floppy, but i dont know if its ok, reset and see yourself, if bios is broken You can flash it on flash programmer or go to some computer service and they do it for you :)

Read This http://www.flazh.de/bios/english/update.htm

AWARD-BIOS:
We need our Bootdiskette and do only 1 Change on it:
Create (on a 2nd PC using a Texteditor) a File called: "AUTOEXEC.BAT", with only one Line: "awdflash.exe updatefilename /py /sn" (without quotes!) and copy it onto our Diskette.

Now, boot from Diskette and listen to the Beeps:

While Booting:
2 short Beeps = no Bootdiskette in Drive A:
Continuously short Beeps = no Floppydrive ;-)

After the Flash Process:
Continuously long Beeps = Programming successfully. RESTART!

AMI-BIOS:
You will need an empty and formatted Diskette. Copy only your BIOS-Updatefile on it and rename it to "AMIBOOT.ROM". Now, restart your PC and press "" until you can hear 1 Beep. After 10-30 Seconds, you will hear: 4 Beeps = "BIOS was re-programmed !"




Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: