Re: M592 memory dimm

Re: M592 memory dimm

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Henry on January 01, 2002 at 15:51:19:

In Reply to: M592 memoty dimm posted by Bertonio on January 01, 2002 at 13:19:40:

: Hi
: I have the above motherboard and wish to upgrade the memory dimm slot.
: I currently have 16MB on board and x2 8MB EDO SIMM.
: What type of memory do i use in the dimm slot?.

STUDY your mainboard manual - it should tell you that ONLY (fairly uncommon) EDO/FPM memory is supported for the DIMM slot; 3.3volt SDRAM is NOT supported by the M592 mainboard.

Appears that you have 16MB onboard EDO memory - PLUS the SIMM and DIMM slots; total memory supported is 144MB - so (theoretically) you might be able to add 128MB - but NOT likely in the DIMM slot - maybe two 64MB EDO or FPM SIMMs would work for you?? Suggest that you verify before you try OR get memory from a store that will allow return if it does not work in your board.

Suggest that you check SIMM capacity of your board - 64MB EDO sticks are less than $35 each (

You can find a lot of free (unofficial) PC Chips support at:

You can find brief mainboard specs and download a manual from the bottom of the page at:

Hope this helps,

Follow Ups:

Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
E-Mail (optional):
please note: your e-mail address will be visible in your message.



Optional Link URL:
Link Title:
Optional Image URL: