Re: flashed with wrong bios? Help please !!

Re: flashed with wrong bios? Help please !!

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Ruslan on October 04, 2001 at 09:15:04:

In Reply to: Re: flashed with wrong bios? Help please !! posted by Henry on October 03, 2001 at 21:19:43:

Error message You have got mean, what BIOS cann't update checksumm after reboot... Probably You either didn't rewrite boot block (it's quite usual thing with JetWay motherboards You have),or progamming voltage isn't set correctly. May be, original BIOS and new BIOS has different (and thus,uncompatible)boot block. I've seen many times,especially with JetWays motherboards like Yours.
Likelyhood You have 12v programming flash memory (Intel28F001BX-T or MX28F001T).There is special switch (jumper) located beetwen slots, responcible for what exactly programming voltage (5V or 12V) will be aplied to the BIOS chip.
Check it out and choose correct one. If voltage is set correctly,follow Henry's advice. Check also line in BIOS setting like "Reset user configuration data = disable (or "no")" .Change that line to "enable"("yes").
If it all does not help You, You can rewrite Your BIOS chip in another motherboard.
For addition information,read my topic here:
Good luck!

Follow Ups:

Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
E-Mail (optional):
please note: your e-mail address will be visible in your message.



Optional Link URL:
Link Title:
Optional Image URL: