533T-AT Version 2.0 Manual

533T-AT Version 2.0 Manual


[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Astrotrain on June 19, 2000 at 15:08:44:


I picked up a 533T-AT Version 2.0 Jamicon board from
e-bay.

The only problem is, there was no manual for the board.

I have hit www.jamicon.com, and even know they are
down for upgrades, there pages are still accessable
for information:

http://www.jamicon.com/support/manuals.htm

But alais, they do not have the manual for the
"533T-AT Version 2.0" motherboard.

Then my wife, performed a search on '533t & red hat',
and the following site:

http://www.hytech-wholesale.com/Products/info.htm

Came up with the following information:

Regarding the KM-533T mainboards (the green boxes):

"The mainboard instructions do not have a setting
listed for 2.2 Vcore (K6-266). According to their
techs, if you want the board to support a Vcore of
2.2 volts, go to jumper J24 and put jumpers on pins
13 and 7 (settings for 2.1 V and 3.2 V respectively).

Before you install the USB suppliment on Jamicon TX
mainboards, make sure you enable the IRQ for USB in
the BIOS, this will help you avoid some annoying
"Fatal OE" errors."

This is all the info we have found so far, if anyone
has the manual, please let us know.

Or if you have copy of it which you could send by
e-mail, please do so.

Thank You In Advance

Astrotrain




Follow Ups:


Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
Name:
E-Mail (optional):
please note: your e-mail address will be visible in your message.

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL: