Re: 533T-AT Version 2.0 Manual

Re: 533T-AT Version 2.0 Manual

[ Follow Ups ] [ Post Followups ] [ FAQ ]
[ Back to Messages ]

Posted by Ahmet DİNÇER on April 17, 2001 at 04:49:37:

In Reply to: 533T-AT Version 2.0 Manual posted by Astrotrain on June 19, 2000 at 15:08:44:

: I picked up a 533T-AT Version 2.0 Jamicon board from
: e-bay.

: The only problem is, there was no manual for the board.

: I have hit, and even know they are
: down for upgrades, there pages are still accessable
: for information:


: But alais, they do not have the manual for the
: "533T-AT Version 2.0" motherboard.

: Then my wife, performed a search on '533t & red hat',
: and the following site:


: Came up with the following information:

: Regarding the KM-533T mainboards (the green boxes):

: "The mainboard instructions do not have a setting
: listed for 2.2 Vcore (K6-266). According to their
: techs, if you want the board to support a Vcore of
: 2.2 volts, go to jumper J24 and put jumpers on pins
: 13 and 7 (settings for 2.1 V and 3.2 V respectively).

: Before you install the USB suppliment on Jamicon TX
: mainboards, make sure you enable the IRQ for USB in
: the BIOS, this will help you avoid some annoying
: "Fatal OE" errors."

: This is all the info we have found so far, if anyone
: has the manual, please let us know.

: Or if you have copy of it which you could send by
: e-mail, please do so.

: Thank You In Advance

: Astrotrain

Follow Ups:

Post a Followup

Please note:
  • Messages must be on the topic of this forum!
  • No posting of requests for cracks, codes, serials, or warez!
  • No posting of illegal software or links to such sites!
  • No use of profanity or inappropriate or offensive language!
  • Spamming is not allowed!
  • We track the IP addresses of forum abusers!
  • Abuse of this forum will be reported to your ISP!
E-Mail (optional):
please note: your e-mail address will be visible in your message.



Optional Link URL:
Link Title:
Optional Image URL: